Klicka för att öppna expanderad vy
2809 kr
FRAKTFRITT
INFORMATION OM PRODUKTEN
Controlling a projection screen has never been this easy Get complete control when you pair the All-In-One Control Box with a motorized projection screen. This new accessory can be combined with motorized projection screens without a built-in RF receiver and offers the following options Relay dry-contact RF radiofrequency control IR infrared control Manual Switch on the box 12 volt trigger Relay dry-contact
Use the relay dry contact points in the control box to connect the screen to be operated with a third party control system. A control system includes the projection screen into the full room AV control. RF radiofrequency control
Control the projection screen via a radio frequency remote control. The remote control unit operates on frequency 433.92 MHz. RF has an effective range up to 30 meters, depending on the local environment. IR infrared
Control the projection screen via an infrared remote control. For infrared control a direct line of sight with the control box is needed. IR can be a solution for environments with restricted RF access. Infrared has an effective range up to 8 meters. Manual Switch On the side of the control box you can find three buttons to control the projection screen directly. This additional control method function as a back-up to ensure the screen can still be operated even when connected control options fail. 12 volt DC trigger
Connect the 12 volt trigger option to any 12 volt output to trigger the projection screen. The 12 volt can be from a projector 12 volt trigger output or from an AV control system. POWER SENSING TRIGGER Option
The Power Sensing trigger will be connected in between the power source and the projector. When the projector is turned on, the trigger senses power going to the projector and signal the projection screen to unroll. When the power is switched of the trigger will signal the projection screen to retract again. The Projecta Power Sensing Trigger only works in combination with the All-in-One Control Box
All-in-One Control Box are avalible for
Tensioned Descender ElectrolDescender ElectrolTensioned Elpro ConceptElpro ConceptCompact ElectrolExtensaTensioned Descender Large ElectrolDescender Large ElectrolTensioned Elpro Large ElectrolElpro Large ElectrolMaster Electrol
SPECIFICATIONS
Power supply AC 200-240V, 50 Hz /- 10% Operating temperature 0 to 70 CRF Frequency 433.92 MHzIR Frequency 38 KHzPower consumption <300W / 0.4W in standbyTransmission power < 10mWSensitivity -110 dBmLoad capacity 1000W
Use the relay dry contact points in the control box to connect the screen to be operated with a third party control system. A control system includes the projection screen into the full room AV control. RF radiofrequency control
Control the projection screen via a radio frequency remote control. The remote control unit operates on frequency 433.92 MHz. RF has an effective range up to 30 meters, depending on the local environment. IR infrared
Control the projection screen via an infrared remote control. For infrared control a direct line of sight with the control box is needed. IR can be a solution for environments with restricted RF access. Infrared has an effective range up to 8 meters. Manual Switch On the side of the control box you can find three buttons to control the projection screen directly. This additional control method function as a back-up to ensure the screen can still be operated even when connected control options fail. 12 volt DC trigger
Connect the 12 volt trigger option to any 12 volt output to trigger the projection screen. The 12 volt can be from a projector 12 volt trigger output or from an AV control system. POWER SENSING TRIGGER Option
The Power Sensing trigger will be connected in between the power source and the projector. When the projector is turned on, the trigger senses power going to the projector and signal the projection screen to unroll. When the power is switched of the trigger will signal the projection screen to retract again. The Projecta Power Sensing Trigger only works in combination with the All-in-One Control Box
All-in-One Control Box are avalible for
Tensioned Descender ElectrolDescender ElectrolTensioned Elpro ConceptElpro ConceptCompact ElectrolExtensaTensioned Descender Large ElectrolDescender Large ElectrolTensioned Elpro Large ElectrolElpro Large ElectrolMaster Electrol
SPECIFICATIONS
Power supply AC 200-240V, 50 Hz /- 10% Operating temperature 0 to 70 CRF Frequency 433.92 MHzIR Frequency 38 KHzPower consumption <300W / 0.4W in standbyTransmission power < 10mWSensitivity -110 dBmLoad capacity 1000W
FAKTA
Titel: | Projecta All-in-One Control Box - Control Box for motorized screens incl. RF and IR remote |
Kategori: | Elektronik/Ljud & bild/Projektorer/Tillbehör dukar |
Releasedatum: | 2017-09-25 |
Artikelnummer: | 1114102 |
Lagerstatus: | Beställningsvara Leveranstid: från 5 vardagar |
EAN: | 8700108001542 |
Titel: | Projecta All-in-One Control Box - Control Box for motorized screens incl. RF and IR remote |
Tillverkare: | Projecta |
Tillv. artikelnr: | 10800154 |
Förpackningsmått: | 244x189x114 |
GINZA REKOMMENDERAR:
Rekommenderas
Snittbetyg: 0,0 av 0 omdömen
Skriv recension